Select Page

JKLY-0.6/1KV Aerial Insulated Cable

QIFAN JKLY-0.6/1KV Aerial Insulated Cable is a high quality cable product for low voltage power transmission. It adopts high-quality copper core and Aerial  insulated material to ensure the high efficiency and reliability of power transmission.

The rated voltage of this cable is 0.6/1KV , suitable for various low voltage application scenarios. For example, it can be used in home circuits, building circuits, lighting systems, etc.

The cable uses Aerial insulated, which has good chemical and abrasion resistance. This allows it to be used in a variety of harsh environments such as wet, corrosive or high temperature environments

In addition, the cable complies with international standards and safety standards, and has a long service life and good safety performance. It has been rigorously tested and inspected to ensure its quality and reliability.

Advantages of JKLY-0.6/1KV Aerial Insulated Cable

  • The wire uses high-quality polyvinyl chloride (Aerial) as the insulation material, which has good heat resistance. It can work at higher temperature without melting or deforming the insulating material, ensuring the safety and reliability of the wire.

  • Aerial material has excellent corrosion resistance and can resist the erosion of many chemical substances, including acids, alkalis and solvents. This makes it suitable for use in a variety of environmental conditions, including wet, acidic or alkaline environments.

  • The wire has good electrical properties, providing stable current transmission and low resistance. It has low resistance and inductance, which can reduce energy loss and signal attenuation, ensuring the efficiency and quality of power transmission.

  • The wire is flexible and bendable for easy installation and routing. Its skin is smooth, not easily damaged, and has good wear resistance. This allows installers to quickly and easily complete the routing and connection of wires, improving work efficiency.

Technical Specifications

Basic Introduction of JKLY-0.6/1KV Aerial Insulated Cable

Model:JKLY-0.6/1KV
Rated Voltage:300/500V
Conductor:Type 1 copper conductors for solid conductors; Type 2 copper conductors for stranded conductors.
Insulation:PVC
Product Standards:GB/T 5023-2008
Specification Range:0.5~1.0 mm^2
Conductor Maximum Operating Temperature:+70°C
Operating Environment Temperature:-15°C~+40°C
Cable Laying Temperature:≥ 0°C
Minimum Bending Radius:6D (D is the actual outer diameter of the cable)
Laying method:Surface laying, pipe laying, trunking laying, etc.
Scope of Application:This product is suitable for electrical appliances, instruments and meters and power lighting with AC rated voltage of 300/500V and below
cable WDZ

1KV Aerial Insulated Cable Series

ModelNameMain usage
JKV-0.6/1KVCopper-Core Pvc Insulated Aerial Cable of Rated Voltage 0.6/1KvOverhead fix-ed layoutandwireconducting.etc.
JKLV-0.6/1KVAluminum-Core Pvc Insulated Aerial Cable of Rated Voltage 0.6/1KvOverhead fix-ed layoutandwireconducting.etc.
JKLHV-0.6/1KVAluminum Alloy Core Pvc Insulated Aerial Cable of Rated Voltage 0.6/1KvOverhead fix-ed layoutandwireconducting.etc.
JKY-0.6/1KVCopper-Core Pe Insulated Aerial Cable of Rated Voltage 0.6/1KvOverhead fix-ed layoutandwireconducting.etc.
JKLY-0.6/1KVAluminum-Core Pe Insulated Aerial Cable of Rated Voltage 0.6/1KvOverhead fix-ed layoutandwireconducting.etc.
JKLHY-0.6/1KVAluminum Alloy Core Pe Insulated Aerial Cable of Rated Voltage 0.6/1KvOverhead fix-ed layoutandwireconducting.etc.
JKYJ-0.6/1KVCopper-Core Yjv Insulated Aerial Cable of Rated Voltage 0.6/1KvOverhead fix-ed layoutandwireconducting.etc.
JKLYJ-0.6/1KVAluminum-Core Yjv Insulated Aerial Cable of Rated Voltage 0.6/1KvOverhead fix-ed layoutandwireconducting.etc.
JKLHYJ-0.6/1KVAluminum Alloy Core Yjv Insulated Aerial Cable of Rated Voltage 0.6/1KvOverhead fix-ed layoutandwireconducting.etc.
—END—

JKLY-0.6/1KV General Data

Norminal section ( mm² )

Min. wire No. Of conductor

Outer dia. ( reference ) mm

Insulation thickness mm

Average dia. Of single core mm

Conductor resistance at 20°C ( Q/km )

Min. insulation resistance in rated operation temperature

Hard copper

Soft copper

AI conductor

Al alloy

70℃

90℃

1063.81.06.51.9061.8303.0803.5740.00670.67
1664.81.28.01.1981.1501.9102.2170.00650.65
2566.01.29.40.7490.7271.2001.9390.00540.54
3567.01.411.00.5400.5240.8681.0070.00540.54
5068.41.412.30.3990.3870.6410.7440.00460.46
701210.01.414.10.2760.2680.4430.5140.00400.40
951511.61.616.50.1990.1930.3200.3710.00390.39
1201813.01.618.10.1580.1530.2530.2940.00350.35
1501814.61.820.20.1280.2060.2390.00350.35
1853016.22.022.50.10210.1640.1900.00350.35
2403418.42.225.60.07770.1250.1450.00340.34
—END—
WhatsApp Online logo

Sales Team


Generator - SinoGenWhatApp-Icon

Marine Generator - SeaMacWhatApp-Icon

Parts - PartMacWhatApp-Icon


Sales Manager - Mrs. Wendy Fu

Sales Director - Mr. Jasper Lee WhatApp-Icon

Shipping Service

Contact EMAC Now!

Subscribe To Our Newsletter

Subscribe To Our Newsletter

Subscribe to get the latest updates from electric-wires.com

You have Successfully Subscribed!

Pin It on Pinterest